Can someone w/ an E46 sedan take some measurements for me?

[Nick M3]

I need the dimensions of:
1) the flat area of the rear bumper below the molding.
2) the area on the rear doors under the molding.

Keep in mind that this is for sticker dimensions on the race car -- if there's venting or other crap, I can't put stickers over it, so it's not a included in the measurement.

Thanks!

Edit: Preferably take the measurements on a non-M-Technic/ZHP car. Even better if it's '99-01.

[FC]

Originally Posted by Nick M3

I need the dimensions of:
1) the flat area of the rear bumper below the molding.
2) the area on the rear doors under the molding.

Keep in mind that this is for sticker dimensions on the race car -- if there's venting or other crap, I can't put stickers over it, so it's not a included in the measurement.

Thanks!

Edit: Preferably take the measurements on a non-M-Technic/ZHP car. Even better if it's '99-01.

I can do that tonight for you, if you want. I don't see how a ZHP or not matters as far as the doors.

[Nick M3]

Originally Posted by Fernando

I can do that tonight for you, if you want. I don't see how a ZHP or not matters as far as the doors.

I'll take anythign for starters. I just have this vague recollection that the rear bumpers are different.

[John V]

Originally Posted by Nick M3

I need the dimensions of:
1) the flat area of the rear bumper below the molding.
2) the area on the rear doors under the molding.

Keep in mind that this is for sticker dimensions on the race car -- if there's venting or other crap, I can't put stickers over it, so it's not a included in the measurement.

Thanks!

Edit: Preferably take the measurements on a non-M-Technic/ZHP car. Even better if it's '99-01.

In the future, if you're going to keep referring to the referigerator (I mean... 323) as "the race car" you should capitalize it, use italics, increase it in size and/or put it in bold. Allow me to demonstrate:

Originally Posted by Nick M3

Keep in mind that this is for sticker dimensions on the race car -- if there's venting or other crap, I can't put stickers over it. . .

See how easy?

[Nick M3]

Originally Posted by John V

In the future, if you're going to keep referring to the referigerator (I mean... 323) as "the race car" you should capitalize it, use italics, increase it in size and/or put it in bold. Allow me to demonstrate:



See how easy?

Sorry, I'll refer to the RACE CAR in this fashion from here on out. It's Jed approved.

[JST]

Originally Posted by Nick M3

I'll take anythign for starters. I just have this vague recollection that the rear bumpers are different.

The rear bumper is quite different. The plastic side skirts are also different, though the door skins should be the same on all E46 sedans.

[FC]

Originally Posted by JST

The rear bumper is quite different. The plastic side skirts are also different, though the door skins should be the same on all E46 sedans.

Exactly. I'll get the door dimensions tonight.

[Nick M3]

Someone else just got them for me...

8x23" on the doors, 8.5x55" on the bumper.

Thanks, though!

[FC]

Originally Posted by Nick M3

Someone else just got them for me...

8x23" on the doors, 8.5x55" on the bumper.

Thanks, though!

No problem.

[clyde]

Originally Posted by John V

In the future, if you're going to keep referring to the referigerator (I mean... 323) as "the race car" you should capitalize it, use italics, increase it in size and/or put it in bold. Allow me to demonstrate:



See how easy?

Excuse me, but the MAR is that way.