carmudgeons.com  

Go Back   carmudgeons.com > Automotive Forums > Car Talk

Reply
 
Thread Tools Display Modes
Old 10-06-2020, 11:22 AM   #1
JST
195
 
JST's Avatar
 
Join Date: Oct 2003
Posts: 24,593
987 Suspension upgrades?

Took the Boxster in for a tech inspection for a track day, and the shop suggested that the shocks are near end of life. Not too surprising, I guess, with 52,000 miles and probably 20 track days on the car, but if I'm going to replace the shocks I might as well do an upgrade.

The Spyder/Cayman R upgrade was popular a few years ago, but the shop suggested Bilsteins (probably PSS9s, but maybe just this "Sport" setup, need to clarify) might be better and more durable, and cheaper.

Any thoughts on this?
JST is offline   Reply With Quote
Old 10-06-2020, 11:29 AM   #2
Nick M3
Relic
 
Nick M3's Avatar
 
Join Date: Oct 2003
Location: Bethesda, MD
Posts: 12,438
Bilsteins are high gas monotubes. Expect a rougher ride, especially with the PSS9 stiffer springs. Handling will be a lot better.

We have Bilstein B8s in the 993 and are a lot happier with them. But the 993 OE shock supplier for the US market is MONROE.
...and they were definitely used up after 98k miles and a LOT of track days.

My two cents are that you'll probably be best off leaving it alone until you feel like you want to do something.
__________________
2011 M3
2006 Sierra 2500HD 4WD LBZ/Allison
2004 X5 3.0i 6MT
1995 M3 S50B32
1990 325is
1989 M3 S54B32

Hers:
1989 325iX
1996 911 Turbo


Nick M3 is offline   Reply With Quote
Old 10-06-2020, 11:33 AM   #3
Nick M3
Relic
 
Nick M3's Avatar
 
Join Date: Oct 2003
Location: Bethesda, MD
Posts: 12,438
It's worth noting that high gas monotubes feel and ride *amazing* at speed. Nothing else compares. But because of the internal gas pressure, they don't do well at low speeds as they resist compression. It's not a matter of valving, so much as the gas pressure. More modern monotubes are integrating bypass valves so that the shocks will handle these conditions better. (Ohlins Road and Track for example.)
__________________
2011 M3
2006 Sierra 2500HD 4WD LBZ/Allison
2004 X5 3.0i 6MT
1995 M3 S50B32
1990 325is
1989 M3 S54B32

Hers:
1989 325iX
1996 911 Turbo


Nick M3 is offline   Reply With Quote
Old 10-06-2020, 11:41 AM   #4
John V
No more BMWs
 
John V's Avatar
 
Join Date: Apr 2005
Carmudgeonly Ride: Ram, MS3, CX-5, RX-8
Location: Glenwood, MD
Posts: 14,753
Josh, I'm with Nick on this one. My car is approaching 80k and it feels like the dampers are getting near end-of-life.

A friend of mine has the Ohlins R&T on his RX-8 and says they ride very well on the street (he lives in Brooklyn, so not exactly great roads) and are tolerant of reasonably high spring rates.

https://www.ohlinsusa.com/parts/2006...to-rt-pou-mr80

$3k is a lot, but if you're thinking you'll keep the car for a long time, as I am mine, maybe it's worth it? I was never a fan of the street manners of Bilsteins on my 986.
John V is offline   Reply With Quote
Old 10-06-2020, 12:04 PM   #5
Nick M3
Relic
 
Nick M3's Avatar
 
Join Date: Oct 2003
Location: Bethesda, MD
Posts: 12,438
987 PSS9s are not much of a cost savings, either.
__________________
2011 M3
2006 Sierra 2500HD 4WD LBZ/Allison
2004 X5 3.0i 6MT
1995 M3 S50B32
1990 325is
1989 M3 S54B32

Hers:
1989 325iX
1996 911 Turbo


Nick M3 is offline   Reply With Quote
Old 10-06-2020, 12:33 PM   #6
JST
195
 
JST's Avatar
 
Join Date: Oct 2003
Posts: 24,593
Thanks--that's very helpful. It's obviously a car I use on the street much more than the track, and while I don't mind a firm ride I also don't want to punish myself. If John didn't like the Bilsteins on the 986 for the street, that probably answers the question.
JST is offline   Reply With Quote
Old 10-06-2020, 12:37 PM   #7
Nick M3
Relic
 
Nick M3's Avatar
 
Join Date: Oct 2003
Location: Bethesda, MD
Posts: 12,438
Quote:
Originally Posted by JST View Post
Thanks--that's very helpful. It's obviously a car I use on the street much more than the track, and while I don't mind a firm ride I also don't want to punish myself. If John didn't like the Bilsteins on the 986 for the street, that probably answers the question.
Yeah. If the Ohlins had been a viable option for the 993 back when I did the suspension (they didn't exist), I would have gone that way. Today, they exist, but are $6,500, so still not viable.
__________________
2011 M3
2006 Sierra 2500HD 4WD LBZ/Allison
2004 X5 3.0i 6MT
1995 M3 S50B32
1990 325is
1989 M3 S54B32

Hers:
1989 325iX
1996 911 Turbo


Nick M3 is offline   Reply With Quote
Old 10-06-2020, 12:48 PM   #8
JST
195
 
JST's Avatar
 
Join Date: Oct 2003
Posts: 24,593
Quote:
Originally Posted by Nick M3 View Post
Yeah. If the Ohlins had been a viable option for the 993 back when I did the suspension (they didn't exist), I would have gone that way. Today, they exist, but are $6,500, so still not viable.
Yeah; they're a lot cheaper for the 987 (and are only about $700 more than the PSS9s).

My real question is whether it's worth doing those over a set of stock shocks, given that I'm mostly driving the car on the street.
JST is offline   Reply With Quote
Old 10-06-2020, 12:53 PM   #9
Nick M3
Relic
 
Nick M3's Avatar
 
Join Date: Oct 2003
Location: Bethesda, MD
Posts: 12,438
Quote:
Originally Posted by JST View Post
Yeah; they're a lot cheaper for the 987 (and are only about $700 more than the PSS9s).

My real question is whether it's worth doing those over a set of stock shocks, given that I'm mostly driving the car on the street.
I'm still at the "is it worth doing any shock changes at all? place. The shop saying your shocks are on the worn end doesn't mean that you need to replace them, unless it bothers you.
__________________
2011 M3
2006 Sierra 2500HD 4WD LBZ/Allison
2004 X5 3.0i 6MT
1995 M3 S50B32
1990 325is
1989 M3 S54B32

Hers:
1989 325iX
1996 911 Turbo


Nick M3 is offline   Reply With Quote
Old 10-06-2020, 01:00 PM   #10
JST
195
 
JST's Avatar
 
Join Date: Oct 2003
Posts: 24,593
Quote:
Originally Posted by Nick M3 View Post
I'm still at the "is it worth doing any shock changes at all? place. The shop saying your shocks are on the worn end doesn't mean that you need to replace them, unless it bothers you.
Yes, that's probably the best place to end up right now, especially since I'm also doing the water pump and tires and am...slightly tired of spending money on it at the moment.

EDIT: How hard would it be to DIY those coilovers?
JST is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
MCS cosmetic upgrades. FC Car Talk 16 06-20-2011 10:21 PM


All times are GMT -4. The time now is 07:31 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Forums © 2003-2008, 'Mudgeon Enterprises - Site hosting by AYN & Associates, LLC