10-06-2020, 11:22 AM | #1 |
195
Join Date: Oct 2003
Posts: 24,623
|
987 Suspension upgrades?
Took the Boxster in for a tech inspection for a track day, and the shop suggested that the shocks are near end of life. Not too surprising, I guess, with 52,000 miles and probably 20 track days on the car, but if I'm going to replace the shocks I might as well do an upgrade.
The Spyder/Cayman R upgrade was popular a few years ago, but the shop suggested Bilsteins (probably PSS9s, but maybe just this "Sport" setup, need to clarify) might be better and more durable, and cheaper. Any thoughts on this? |
10-06-2020, 11:29 AM | #2 |
Relic
Join Date: Oct 2003
Location: Bethesda, MD
Posts: 12,466
|
Bilsteins are high gas monotubes. Expect a rougher ride, especially with the PSS9 stiffer springs. Handling will be a lot better.
We have Bilstein B8s in the 993 and are a lot happier with them. But the 993 OE shock supplier for the US market is MONROE. ...and they were definitely used up after 98k miles and a LOT of track days. My two cents are that you'll probably be best off leaving it alone until you feel like you want to do something.
__________________
2011 M3 2006 Sierra 2500HD 4WD LBZ/Allison 2004 X5 3.0i 6MT 1995 M3 S50B32 1990 325is 1989 M3 S54B32 Hers: 1989 325iX 1996 911 Turbo |
10-06-2020, 11:33 AM | #3 |
Relic
Join Date: Oct 2003
Location: Bethesda, MD
Posts: 12,466
|
It's worth noting that high gas monotubes feel and ride *amazing* at speed. Nothing else compares. But because of the internal gas pressure, they don't do well at low speeds as they resist compression. It's not a matter of valving, so much as the gas pressure. More modern monotubes are integrating bypass valves so that the shocks will handle these conditions better. (Ohlins Road and Track for example.)
__________________
2011 M3 2006 Sierra 2500HD 4WD LBZ/Allison 2004 X5 3.0i 6MT 1995 M3 S50B32 1990 325is 1989 M3 S54B32 Hers: 1989 325iX 1996 911 Turbo |
10-06-2020, 11:41 AM | #4 |
No more BMWs
Join Date: Apr 2005
Carmudgeonly Ride: Ram, MS3, CX-5, RX-8
Location: Glenwood, MD
Posts: 14,753
|
Josh, I'm with Nick on this one. My car is approaching 80k and it feels like the dampers are getting near end-of-life.
A friend of mine has the Ohlins R&T on his RX-8 and says they ride very well on the street (he lives in Brooklyn, so not exactly great roads) and are tolerant of reasonably high spring rates. https://www.ohlinsusa.com/parts/2006...to-rt-pou-mr80 $3k is a lot, but if you're thinking you'll keep the car for a long time, as I am mine, maybe it's worth it? I was never a fan of the street manners of Bilsteins on my 986. |
10-06-2020, 12:04 PM | #5 |
Relic
Join Date: Oct 2003
Location: Bethesda, MD
Posts: 12,466
|
987 PSS9s are not much of a cost savings, either.
__________________
2011 M3 2006 Sierra 2500HD 4WD LBZ/Allison 2004 X5 3.0i 6MT 1995 M3 S50B32 1990 325is 1989 M3 S54B32 Hers: 1989 325iX 1996 911 Turbo |
10-06-2020, 12:33 PM | #6 |
195
Join Date: Oct 2003
Posts: 24,623
|
Thanks--that's very helpful. It's obviously a car I use on the street much more than the track, and while I don't mind a firm ride I also don't want to punish myself. If John didn't like the Bilsteins on the 986 for the street, that probably answers the question.
|
10-06-2020, 12:37 PM | #7 |
Relic
Join Date: Oct 2003
Location: Bethesda, MD
Posts: 12,466
|
Yeah. If the Ohlins had been a viable option for the 993 back when I did the suspension (they didn't exist), I would have gone that way. Today, they exist, but are $6,500, so still not viable.
__________________
2011 M3 2006 Sierra 2500HD 4WD LBZ/Allison 2004 X5 3.0i 6MT 1995 M3 S50B32 1990 325is 1989 M3 S54B32 Hers: 1989 325iX 1996 911 Turbo |
10-06-2020, 12:48 PM | #8 | |
195
Join Date: Oct 2003
Posts: 24,623
|
Quote:
My real question is whether it's worth doing those over a set of stock shocks, given that I'm mostly driving the car on the street. |
|
10-06-2020, 12:53 PM | #9 |
Relic
Join Date: Oct 2003
Location: Bethesda, MD
Posts: 12,466
|
I'm still at the "is it worth doing any shock changes at all? place. The shop saying your shocks are on the worn end doesn't mean that you need to replace them, unless it bothers you.
__________________
2011 M3 2006 Sierra 2500HD 4WD LBZ/Allison 2004 X5 3.0i 6MT 1995 M3 S50B32 1990 325is 1989 M3 S54B32 Hers: 1989 325iX 1996 911 Turbo |
10-06-2020, 01:00 PM | #10 | |
195
Join Date: Oct 2003
Posts: 24,623
|
Quote:
EDIT: How hard would it be to DIY those coilovers? |
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
MCS cosmetic upgrades. | FC | Car Talk | 16 | 06-20-2011 10:21 PM |