11-20-2016, 11:22 AM | #1 |
Solving problems
Join Date: Oct 2003
Carmudgeonly Ride: M5 / 718 GTS / Cooper S / GTI / LR4
Location: Metro Boston
Posts: 25,266
|
LR4 brake work
LR4's are notorious consumers of brakes, and LR parts and dealer fees are comically high ($2k++ for a full job). I bought a full OEM LR brake kit (all pads and discs plus 2 sensors and sacrificial hardware - $900 - cheapest I could get) figuring I'd do discs and pads in the rear now and discs and pads in the front in the spring. Pads looked pretty bad in the back and I had heard conflicting reports as to whether or not you could get two pads out of one disc or they had to be changed at the same time.
Started with rear left and outside pad was in sad shape, but inside one was better (and that's why the sensor had not yet tripped). Measured the new rotor and it's 20.00mm on the nose and it is stamped with a min thickness of 17mm. The worst measurement I can get on my existing rotor is 19.51mm. As a result, I left the rotors alone despite some slight grooving. Car has 23.5k miles on factory brakes. Looks like I'll be holding on to those discs for a couple of years at least. As for the brake bleed (3 years in, per LR schedule), the old fluid came out looking orange, which is new to me. My experience with European cars is that new fluid looks like vegetable oil and old fluid looks like olive oil (thicker and with a distinct dark yellow/green hue). The new stuff (Castrol DOT 4 synthetic) looks like all other new brake fluid I've seen - vegetable oil-like. But the old stuff came out looking very orange. Weird. Anyway I flushed it with the Motive bleeder using the dry method. Worked reasonably well though I was surprised by the low flow rate. Test drove car and all is well. Oh yeah, and my F'n lift rocks. The LR4 is a PITA given the weight and the outrageous amount of wheel travel (prior to my lift, I had to put my floor jack on two 2x10's to get a wheel/tire to clear the floor by 1/4"). To be able to have all for wheels out at the same time and at comfortable height is just awesome. I think my wife has seen me use it enough by now that I have never gotten grief for buying it and never makes snarky remarks other than to remind me how lucky I am. |
11-20-2016, 01:01 PM | #2 | |
•••••••
Join Date: Oct 2003
Carmudgeonly Ride: '11 1M
Location: Churzee
Posts: 17,741
|
Quote:
__________________
2011 1M |
|
11-20-2016, 05:54 PM | #3 |
lawn boy
Join Date: Oct 2003
Carmudgeonly Ride: e46m3, f25x3,C5 Z06, C4 Vette, 06 CTD Ram, and a trailer
Location: Maryland
Posts: 14,029
|
|
11-21-2016, 03:56 PM | #4 |
No more BMWs
Join Date: Apr 2005
Carmudgeonly Ride: Ram, MS3, CX-5, RX-8
Location: Glenwood, MD
Posts: 14,753
|
24,000 miles and it needs brakes? What the fuck?
|
11-21-2016, 04:03 PM | #5 |
Solving problems
Join Date: Oct 2003
Carmudgeonly Ride: M5 / 718 GTS / Cooper S / GTI / LR4
Location: Metro Boston
Posts: 25,266
|
|
11-21-2016, 04:04 PM | #6 |
No more BMWs
Join Date: Apr 2005
Carmudgeonly Ride: Ram, MS3, CX-5, RX-8
Location: Glenwood, MD
Posts: 14,753
|
Can you at least put some halfway decent pads on it to mitigate that problem?
|
11-21-2016, 04:11 PM | #7 | |
Solving problems
Join Date: Oct 2003
Carmudgeonly Ride: M5 / 718 GTS / Cooper S / GTI / LR4
Location: Metro Boston
Posts: 25,266
|
Quote:
I guess I should coat them with oil or other rust inhibitors. |
|
11-21-2016, 04:12 PM | #8 |
Solving problems
Join Date: Oct 2003
Carmudgeonly Ride: M5 / 718 GTS / Cooper S / GTI / LR4
Location: Metro Boston
Posts: 25,266
|
Oh, BTW, here's the old LR4 brake fluid (left), 911TT (middle - and representative of all prior experience), and the bottle of new stuff I put on.
|
11-21-2016, 06:34 PM | #9 |
Chief title editor
Join Date: Oct 2003
Posts: 26,599
|
Third set of pads and second rotors on the front of the FoST need replacing before 50k...
__________________
OH NOES!!!!!1 MY CAR HAS T3H UND3R5T33R5555!!!!!!1oneone!!!!11 Team WTF?! What are you gonna do? |
11-21-2016, 06:43 PM | #10 |
lawn boy
Join Date: Oct 2003
Carmudgeonly Ride: e46m3, f25x3,C5 Z06, C4 Vette, 06 CTD Ram, and a trailer
Location: Maryland
Posts: 14,029
|
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Brake technology and brake fade in Car&Driver. | lemming | Car Talk | 17 | 06-26-2008 03:45 PM |
Brake pad suggestions? | ff | Technical Superiority | 20 | 01-10-2008 05:40 PM |
E46 brake job DIY? | Plaz | Car Talk | 58 | 02-13-2005 10:35 PM |