All 1/2 drive, primarily used for wheels, but also other stuff. I currently have a beam type torque wrench, which works fine but is a pain for quick wheel swaps.
1)
SK, 10-150 ft lbs
2)
SK, 20-250 ft lbs
3) Craftsman 20-150 from local flyer. $59
I'm thinking 1). 90 ft lbs is still near the upper middle of the range so it should be fine, and having a lower range might make it more accurate for lower torque jobs. I know that near the bottom of the range they're not as accurate.
Suggestions?