Oil Changes - BMW and making messes....lol
Hi everyone -
I have been doing oil changes in E38's for FOREVER and now have recently had a situation come up... When being removed, the filter is not staying attached to the screw'd in cover so - when I go to remove the filter, the cover unscrews and leaves the filter seated in the housing not allowing the filter to drain. As such - when the cover is clear of the housing - all the oil that is still trapped there spooges all over. I have to manually pull up the filter to allow the housing to drain. I have had this happen a couple of times... The filter snaps into the cover ok (I guess) but the drag on the removal seems to overpower the retention on the cover. I placed a new filter on the cover and installed into the housing. I then remove the cover and the filter stayed seated in the housing. I have been using Hengst filters for a while and have had this happen for the last 2 or 3 oil changes. Thoughts? Any experiences with other brands? Mahle, Bosch, Mann filters do better at this? I may even get a new housing cover.... while the filter does seem to snap to the cover ok - maybe it is not 'ok enough' to overcome housing drag for pulling it up.... Either way - just wanted to see if any of you who wrench on your own cars have had any thoughts on this.... Thanks |
I generally use Mann filters, but have no strong feelings.
|
Generally Mann and Mahle are good ones that I have used. They also tend to be OEM for many European brands.
|
All times are GMT -4. The time now is 11:09 PM. |
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Forums © 2003-2008, 'Mudgeon Enterprises - Site hosting by AYN & Associates, LLC